Radiator Replacement in Bilston

Radiator replacement in Bilston for old, rusty or leaking radiators. We drain the system, swap the radiator, fit new valves if needed, then refill and bleed it so your room heats up properly.

Signs a Radiator Needs Replacing

Cold spots that don't clear after bleeding, rust patches, pinhole leaks or brown water when you bleed it can all mean a radiator is near the end of its life. If a room never gets warm enough, the radiator may also be too small for the space.

More Information

Matching the Size and Output

Swapping for the same width makes the job simpler, as the new radiator can use the existing pipes. But it's worth checking the heat output too. A double panel radiator gives out more heat than a single panel of the same size. We'll help you pick one that suits the room.

Fitting New Valves at the Same Time

Old radiator valves can seize or leak. Replacing a radiator is a good time to fit new valves, including thermostatic valves that let you set each room's temperature. It costs less to do both together than to come back and change the valves later.

About us

Radiator replacement is part of the everyday plumbing we do alongside fire doors and joinery. Roscommon Joiners has 25 years in the trade and works in homes across Bilston, Stowlawn, Lanesfield and nearby parts of the West Midlands. We take care to protect floors and furniture when draining and refilling your heating system.

  • City & Guilds qualified in carpentry and joinery

  • 25 years in the trade

  • Fire door fitting, repairs and inspections

  • Joinery and plumbing from one team

  • Open weekdays and Saturday mornings

Frequently Asked Questions

How long does radiator replacement take in Bilston?

Replacing one radiator in Bilston usually takes a couple of hours, including draining down, fitting and refilling the system. If the pipes need moving to suit a different size, it takes longer. Replacing several radiators at once can often be done in a single day.

Do I need to drain my whole heating system to replace a radiator in Bilston?

Not always. On some systems, the radiator can be isolated and drained on its own. Often, though, the system is partly or fully drained, especially if valves are being changed. We'll check your system in Bilston and choose the method that causes the least disruption.

Should I bleed a new radiator in Bilston?

Yes. A new radiator is bled after fitting to let out trapped air, and it may need bleeding again after a few days as air settles. On sealed systems, the boiler pressure may need topping up after bleeding. We'll show you how to do this after your radiator replacement in Bilston.

Our reviews